Rose electronics Xtensys Manuel d'instructions télécharger pdf (Page 23)

XTENSYS INSTALLATION AND OPERATIONS MANUAL

Configure user

Figure 8. Configure user menu

The configure user menu is used to define a user name, assign an access password, and assign a specific profile to

the user. Duplicate names are acceptable; however, all persons using the same user name will have the same

access rights.

User name (Default: User xx, where x = 1 to 80)

To change a user name, select it and press [Enter]. An input box will display. Type in a new user name and press

[Enter]. (8 characters max. case sensitive)

Password (Default: no password)

This field assigns a unique password to a selected user. Any user station that has “Login” enabled, the user must

enter their username and password to gain access to the station. To assign or change a user password, select the

user, then the password field and press [Enter]. An input box will display. Type in a password for the selected user

and press [Enter]. Passwords can be up to 8 characters in length and are case sensitive.

Profile (Default: Profile x, where x = 1 to 80)

This field is used to assign an access profile to a selected user.

Profiles can be defined to limit the type of access to the computers. To change an assigned profile for a selected

user, first select the user, and then select the profile to change and press [Enter]. A selection box will display listing

the profiles available. Select the profile to assign to the selected user and press [Enter]. Use the page up/down keys

for more profiles. Profiles are defined on the “Configure profile” menu.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Pas de commentaire

Rose electronics Xtensys Manuel d'instructions Page 23