Rose electronics KVM-2UPMH Manuel d'instructions télécharger pdf (Page 13)

INSTALLATION

Vista KVM-Series Installation and Operations Manual

Installation

Installation of the Vista switch consists of the following steps:

1. Connect the KVM station to the Vista switch

2. Connect the CPUs to the Vista switch

3. Sequentially apply power, boot the CPUs

4. Verify keyboard, mouse and CPU operation

It is recommended that the CPUs be powered off.

Step 1 - Connecting the KVM station

Connect your KVM station’s keyboard, video monitor and mouse cables to

the corresponding Vista switches’ keyboard, video monitor and mouse

connectors as shown in Figure 4.

Figure 4. Vista to KVM station

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

Pas de commentaire

Rose electronics KVM-2UPMH Manuel d'instructions Page 13