Rose electronics MultiStation Manuel d'instructions télécharger pdf (Page 11)

MULTISTATION PC INSTALLATION AND OPERATIONS MANUAL

Installing the PCI card

Ground yourself to a grounded metal

object before installing the PCI card

1. Remove the computer cover and

locate an un-used PCI slot on the

motherboard

2. Install the MultiStation PC PCI card

in the PCI slot by firmly applying

uniform pressure on the top of the

card until it seats properly in the

PCI slot

3. Secure the PCI card with the

proper size screw

4. Replace the computer cover

Figure 2. PCI card

Note: The two dipswitches located on the MultiStation PC’s PCI card

should initially be in the “OFF” position (Default shipped position). If

the dipswitches are not in the “OFF” position, set them both to the

“OFF” position before applying any power.

DO NOT install additional cards and remote user modules at this time.

Complete the installation for one and have one user fully operational

before installing additional cards.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

Rose electronics MultiStation Manuel d'instructions Page 11