Rose electronics UltraVista Manuel d'instructions télécharger pdf (Page 13)

UltraVista Plus Installation and Operations Manual 9

DVI-D Input section

The DVI-D Input group displays the current DVI mode that is being captured

(if any) and the preferred mode that has been programmed into the

UltraVista Plus’s EDID. Use the Modify button to update the EDID. The

small square to the left of the current input resolution indicates whether the

UltraVista Plus has genlocked to the input source.

Green – The outputs are genlocked to the input dot clock and vertical sync

Red – The outputs are not genlocked

To change the timings of the input EDID click on the Modify button. The

following dialog window will display. From this window you can modify the

input EDID preferred mode timing standard, the display mode, and detailed

timing.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

Rose electronics UltraVista Manuel d'instructions Page 13