Rose electronics UltraVista Manuel d'instructions télécharger pdf (Page 21)

16 UltraVista Installation and Operations Manual

The first item to perform is set up the communication between the controlling PC and UltraVista. Click on “File”, then

“Settings” and the below settings window will display. Click on the down arrow and select the COM port the serial

cable will be connected to. If you want the program to automatically connect to UltraVista when the program starts,

check the box “Connect to UltraVista at startup”.

Figure 14. Settings

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 56 57

Pas de commentaire

Rose electronics UltraVista Manuel d'instructions Page 21