Rose electronics UltraVista Manuel d'instructions télécharger pdf (Page 54)

UltraVista Installation and Operations Manual 49

Video / DVI Input mode

Select DVI Input mode and press the SELECT button. The Video / DVI Input Mode window will display. Select

Computer x and use the + or – buttons to change between mode A, B, or C for the selected computer. Press the

arrow key to highlight “Target:”. Press the up/down arrow keys to cycle through main A, main B, extn 1-A, etc.

Computer / Change EDID / DDC

You can add two freely selectable video modes to the list of video modes available. Select “COMPUTER”, then

“CHANGE EDI/DDC” to display the COMPUTER / CHANGE EDID/DDC window.

Select the first video mode and modify it to

the additional video mode. Next select the

second video mode and modify it.

Navigate to “Signal:” and select the video

type (digital or analog). Normally you can

leave the setting “digital”.

When all information is correct, use the

up/down arrow buttons and select “WRITE”

and press the SELECT button.

1 2 ... 49 50 51 52 53 54 55 56 57

Pas de commentaire

Rose electronics UltraVista Manuel d'instructions Page 54