Rose electronics switch/hub Manuel d'instructions télécharger pdf (Page 14)

ORION LC Installation and Operations Manual

CrystalView DVI CATx transmitter and receiver for use with the Multiplex

Repeater function.

Multiplex Repeater Operation

The operation of the Orion LC as a Multiplex Repeater is very easy. Once

all cabling is in place and the Orion LC units configured for your application,

the only operating procedure is selecting the video to present on all

monitors. In a 1 x 7 configuration, the single video source is displayed on all

monitors. A 2 x 3 configuration has two video sources, each displayed on

three monitors. A 4 x 4 configuration has four video sources, each

displayed on a single monitor. Cascading the system allows you to present

the video on additional monitors.

In the Multiplex Repeater mode, the push button has no effect. Video is

repeated from the source to the monitors.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Pas de commentaire

Rose electronics switch/hub Manuel d'instructions Page 14