Rose electronics switch/hub Manuel d'instructions télécharger pdf (Page 30)

ORION LC Installation and Operations Manual

Examples:

<CTRL>+<SHIFT>+<I> Enter the command mode

Switch immediately to port 3

Switch the master to port 2 and the secondary

unit connected to the master’s port 2 to port 5

<3>,<RETURN>

Switch the secondary unit to port 3

(secondary unit is the active level selected)

Switch the secondary unit back to port 5

<M>

Select the master level

Switch (the master) immediately to port 5

Switch the master back to port 2

<ESC>

Exit command mode

Serial switching operation

The serial commands only apply to the unit the commands are sent to.

Secondary units can not be switched by serial commands sent to the master

unit. To switch a secondary unit using serial commands, the commands

must be sent to the secondary unit.

Refer to Appendix D for the list of serial commands.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Rose electronics switch/hub Manuel d'instructions Page 30