Rose electronics Translator Manuel d'instructions télécharger pdf (Page 10)

CABLES

SERVEVIEW PRO INSTALLATION AND OPERATIONS MANUAL

Cables

(See Appendix B for cable part numbers)

ServeView Pro to KVM station cables

The KVM cable connects a keyboard, video monitor, and mouse to the

ServeView Pro. The KVM cable is configured with a DB25M connector on

one end and a connector for the keyboard, video, and mouse cables on the

other end. These KVM cable connectors should be compatible with the

types of connectors that are on your KVM stations keyboard, monitor, and

mouse cables.

ServeView Pro to CPU cables

A CPU cable is used to connect each computer to the ServeView Pro. The

CPU cable connects from the DB25F CPU ports on the ServeView Pro to

the keyboard, video, and mouse ports on each CPU. This cable is

configured with a DB25M connector on one end and a connector for the

keyboard, video, and mouse on the other end. These CPU cable

connectors should be compatible with each CPUs keyboard, video, and

mouse port.

ServeView Pro Master to Slave unit cables

In systems needing access to additional CPUs, the ServeView Pro can be

cascaded to other ServeView Pros. To cascade an ServeView Pro to other

“Slave” units, you will need one DB25M to DB25M, switch-to-switch cable

for each expansion unit.

(Rose Electronics switch-to-switch cable part number CAB-CXVSMMnnn.)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Pas de commentaire

Rose electronics Translator Manuel d'instructions Page 10